Volvo Wallbox Guia De Inicio Rapido página 16

3. Hold the RFID chip up to the RFID sensor (5) on
the front panel of the Wallbox and wait for iden-
tification:
A beep sounds and the RFID LED (5) lights up
l
green briefly as soon as the RFID chip has
been successfully identified.
When the charge level LED (2) is pulsing
l
green, the charging process has been started
successfully.
When charging is complete or the vehicle is
l
fully charged, the charge level LED (2) is con-
tinuously lit in green.
Further information
The Wallbox provides the following additional authen-
tication methods, see operating instructions:
Plug & charge
l
Auto charge
l
Approval by remote control
l
Approval in the web app
l
When using OCPP, the backend operator's server
issues the charging approval remotely.
14
Additional information
For the operating instructions,
assembly and installation instructions,
the full text of the EU Declaration of
Conformity and other documents, see
https://public.evse-manu-
als.com/volvo/index.html
EU conformity
eSystems MTG GmbH hereby declares that the fol-
lowing radio equipment types GHO22E202x*,
GHO22E213x*, GHO22E223* comply with Directive
2014/53/EU.
*x may represent any letter.
The Wallbox is used for charging electric vehicles that
comply with the generally applicable standards and dir-
ectives for electric vehicles.
The Wallbox is suitable for stationary use indoors and
outdoors and in private and semi-public spaces for
operation within the defined electrical and envir-
onmental specifications.