Publicidad
10
TBV BERLIN SERIES
Amplifi er Considerations
TURBOSOUND TBV BERLIN series loudspeakers are optimized for use with LAKE LM series controllers and LAB GRUPPEN amplifi ers or LAB GRUPPEN DSP amplifi ers with
LAKE processing. A full range of DSP presets to suit a variety of confi gurations is provided for download on the TURBOSOUND website where limiters, crossover points,
corrective component time alignment and equalisation are pre-programmed to ensure optimum sound quality and long-term reliability. Use LAB GRUPPEN 'CAFE'
software - available for download from labgruppen.com - to determine the optimum amplifi er confi guration for your system. Parameters for the use of third party
amplifi cation and processing can be provided upon request.
TURBOSOUND TBV BERLIN series loudspeaker enclosures should be driven by high quality power amplifi ers designed for true professional use. The use of under
powered amplifi ers must be avoided as heavily clipped signals can cause permanent loudspeaker damage. For subwoofers, passive loudspeakers and low frequency,
mid frequency sections of multi-way active loudspeakers, amplifi ers should be capable of delivering power equal to twice the continuous power rating at the stated
nominal impedance. For the high frequency section of multi-way active loudspeakers, amplifi ers should be capable of delivering power equal to ten times the
continuous power rating at the stated nominal impedance
Model
Mode
Bi-amp LF
Impedance (ohms)
8
Continuous RMS
540
Power Handling (W)
Peak
2,160
Minimum Recommended Amplifi cation (W)
1,080
TBV123
TBV118L
Bi-amp HF
Passive Mode
SUB
8
8
8
60
600
700
240
2,400
2,800
600
1,200
1,400
Quick Start Guide
11
Publicidad
