Sony BRAVIA KD-55X85K Guía De Configuración página 34

Using the "BRAVIA" Sync
Function
In addition to the Control for HDMI
function, you can also use the "BRAVIA"
sync function such as the Sound mode/
Scene Select function.
Note
This function is proprietary function of
Sony. This function cannot operate with
products other than those manufactured
by Sony.
Sound mode/Scene Select
Function
The sound mode of the Sound Bar is
automatically switched according to the
setting of the TV's Scene Select function
or sound mode. For details, refer to the
operating instructions of your TV.
Set the sound mode to AUTO SOUND
(page 22).
Saving Power
Consumption
To use the Sound Bar while saving
power consumption, change the
following settings.
Turn the Sound Bar Off by
Detecting the Using State
When you set the auto standby function
to on, the Sound Bar enters standby
mode automatically when you do not
operate the Sound Bar for about 20
minutes and the Sound Bar is not
receiving an input signal.
Press and hold INDICATORS for 5
seconds to set the function to on or
off.
Auto standby on
The HDMI and BLUETOOTH indicators flash.
Auto standby off
The Dolby ATMOS and DTS:X indicators flash.
Saving Power in Standby
Mode
To save power consumption during the
standby mode, check that you have
made the following settings:
– BLUETOOTH standby mode is set to off
(page 28). (The default setting is on.)
– Control for HDMI function is set to off
(page 29). (The default setting is on.)
– HDMI standby through setting is set to
off (page 30). (The default setting is
auto.)
31
US