YABER V12 Manual Del Usuario página 27

6. Bluetooth Setting
• Connect to an External Bluetooth Speaker
Step1:
Turn on your Bluetooth device and make it ready for a Bluetooth connection.
Step2:
Go to Homepage -> Setting -> Bluetooth to scan available Bluetooth devices, then
select your Bluetooth device and pair it with the projector:
IMPORTANT:
Compared with the wired connection to a speaker, a Bluetooth connection spends
more time processing digital audio data, converting said data to an audio signal,
and streaming the signal. There may be a delay or slight lag on audio due to signal
interference.
As a result, the sound on the speaker may not be in sync with the image on the
projector, especially when you are using wireless screen mirroring with WiFi and
Bluetooth connection at the same time.
If you are experiencing this situation, please check the following options to improve
audio quality:
* Instead of using wireless screen mirroring and Bluetooth connection at the same
time, we recommend using an HDMl connection via the provided HDMl cable and
Bluetooth connection simultaneously. If you still want to use wireless screen mirroring,
it is recommended to output the audio via a wired speaker
* Move your Bluetooth device closer to the projector.
*Keep the projector and your Bluetooth speaker away from other Bluetooth devices to
avoid interference.
EN 27
service@yaber.com