Publicidad
Idiomas disponibles
Idiomas disponibles
www.evolutionpowertools.com
1. To remove the battery from the tool,
press the release button on the battery and
pull out the battery.
2. To insert the battery, place it on the
guide track and push it into the tool. It will
audibly snap in.
Charge status
The battery charge status indicator
signalises the state of charge of the battery.
Press the button on the battery.
The LED lights (B,C) on charger show
different status as below.
RED
GREEN
STATUS
LED
LED
The charger will recover to
Hot/Cold
On
Off
Battery
temperature drops to 40°C
Flashing
Off
Defective
Off
Flashing
Charging
Disconnect charger from
Fully
Off
On
power supply and remove
charged
battery pack from charger
Recharging the battery
WARNING: Allow a hot battery to cool
before charging.
1. Remove the battery from the tool, as
necessary.
2. Slide the battery pack (E) into the
charging compartment of the battery
charger (A).
3. Connect the charger to a suitable power
supply.
4. When the battery is fully recharged
unplug the battery charger from the mains.
5. Remove the battery from the
charger.
Wall-mount holes
The charger has hanging holes for
convenient storage. Install screws in the
wall 5.5 inches (139.7mm) apart. Use screws
sufficiently strong to hold the combined
weight of the charger and battery pack.
GETTING STARTED - UNPACKING
Caution: Take care when unpacking. Check
carefully to ensure that the device is in
good condition. If any parts are found to
be missing, the device and its accessories
should be returned together in their original
packaging to the retailer.
Do not throw the packaging away; keep it
safe throughout the warranty period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible. Do
not let children play with empty plastic bags
due to the risk of suffocation.
MAINTENANCE
REMARK
Clean the battery and charger with a dry
brush or dry cloth.
charge when the
Keep the battery and charger away from
moisture and sharp objects.
or raises to 5°C
Battery pack or charger
WARNING: Remove the plug from the
is defective
socket before carrying out any adjustment,
-
servicing or maintenance.
Your battery charger requires no additional
lubrication or maintenance. Never use water
or chemical cleaners to clean your charger.
Always store your charger in a dry place.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
Environmental damage through incorrect
disposal of the batteries / rechargeable
batteries.
Batteries /rechargeable batteries may not
be disposed of with the usual domestic
waste. They may contain toxic heavy
metals and are subject to hazardous waste
treatment rules and regulations. Please
dispose of batteries according to the
relevant local requirements.
Remove the battery from the product
before disposal.
9
EN
Publicidad
