ENDORFY Thock Compact Wireless NO Manual Del Usuario página 4

Thock Compact Wireless
MECHANICAL GAMING KEYBOARD
LEFT LED: CAPS LOCK
Caps on
=
red
RIGHT LED: BATTERY SUPPLY (ONLY IN WIRELESS MODE)
0-20%
red
BATTERY CHARGE INDICATOR (WIRELESS MODE WITH THE CABLE CONNECTED)
0-20%
blinking red
BATTERY CHARGING (WIRED MODE, ACTIVE WHEN THE KEYBOARD IS OFF)
0-100%
blinking red
WIRELESS MODE (Bluetooth & 2.4G)
+
BT1
+
BT1
+
BT2
+
BT2
+
BT3
+
BT3
+ = Connection in the 2.4G mode (USB receiver)
After the first pairing, during the following connection, the [Z], [X] or [C] key (depending on the selected device: BT1, BT2 or BT3) will be backlit in
white. After successful pairing, the [Z], [X] or [C] key (depending on the selected device: BT1, BT2 or BT3) will turn the same colour as the keyboard
backlight. If the keyboard cannot be paired with the selected device within 180 s, the pairing mode will be disabled. Then, the [Z], [X] or [C] key
(depending on the selected device: BT1, BT2 or BT3) will turn the same colour as the keyboard backlight.
In the wireless mode (Bluetooth and 2.4G), if the keyboard is not used for 5 minutes, the device will enter the first level of the sleep mode, and LED
backlight will be disabled. Press any button to switch the LED backlight of the keyboard back on after the device has entered the first level of sleep
mode.
In the wireless mode (Bluetooth and 2.4G), if the keyboard is not used for 30 minutes, the device will enter the second level of the sleep mode, and
LED backlight will be disabled along with Bluetooth communication. Then, press any button to switch the LED backlight of the keyboard and
Bluetooth communication back on after the device has entered the second level of sleep mode.
CUSTOMER SERVICE
ENDORFY.COM/CONTACT
NO
Caps o
20-50% 50-90%
yellowy
20-50% 50-90%
blinking yellow blinking green
Fully charged
o
= Selecting Bluetooth 1 device
BT1
Pairing Bluetooth 1 device: The [Z] key turns white and starts blinking. After successful pairing,
the [Z] key will once again turn the same colour as the keyboard backlight from before pairing.
=
After failed pairing, the pairing mode will be switched o after 180 seconds.
BT1
The [Z] key will once again turn the same colour as the keyboard backlight from before pairing.
= Selecting Bluetooth 2 device
BT2
Pairing Bluetooth 2 device: The [X] key turns white and starts blinking. After successful pairing,
the [X] key will once again turn the same colour as the keyboard backlight from before pairing.
=
After failed pairing, the pairing mode will be switched o after 180 seconds.
BT2
The [X] key will once again turn the same colour as the keyboard backlight from before pairing.
= Selecting Bluetooth 3 device
BT3
Pairing Bluetooth 3 device: The [C] key turns white and starts blinking. After successful pairing,
the [C] key will once again turn the same colour as the keyboard backlight from before pairing.
=
After failed pairing, the pairing mode will be switched o after 180 seconds.
BT3
The [C] key will once again turn the same colour as the keyboard backlight from before pairing.
o
90-100%
green white
90-100%
blinking white
EN
10 s without clicking
o
Fully charged
o
ENDORFY.COM/EY B THOCK COMPACT WIRELESS
DETAILED INFO