Socket Mobile Socketscan S370 Guia Del Usuario página 16

Follow the button sequence below to configure your reader�
1� Remove the battery door�
2� Enter Configuration Menu by pressing and holding Menu Button for 10s until you
hear "menu"�
3� Press the Menu Button until you advance to the second quadrant� (loop if at the
end)�
4� Press and hold the Power Button for 5 seconds until you hear a melody�
The S370 will implement the configuration, reboot, and resume normal operation.
Note: If no button is pressed after 30 seconds, the S370 will reboot and resume to
normal operation with no change�
F r
actory eset
- c
onFiguration
Menu Button
16
M
enu