Be Cool BC29STTFD Instrucciones De Uso página 103

Step 2: Remove the fixing screw from the bottom of the fan housing, unwind the
power cable and pass it through the hole in the fan base. Then add the base and
rotate it to ensure that the two slots are perfectly aligned with the housing.
Symbolic image
Attention
The mains cable is routed at the top of the fan base.
Step 3: Tighten the fixing screw (clockwise) and allow the power cable to pass
through the cable duct on the edge of the base to make the product flatter and
more stable. You have now completed the assembly of the tower fan. Secure the
base with the 2 screws provided.
Symbolic image
Note: Please note that it is normal that the tower fan with swivel function may
wobble slightly or appear unstable. This is to ensure that the fan does not
immediately fall over when touched and that it performs the swivel function
properly.
103