Safety First - Swingline Stack-and-Shred 750X Manual De Instrucciones

Specifications
Model Number
Sheet Capacity
Manual Feed Slot
Sheet Capacity
Auto-feed Chamber
Duty Cycle
Run Time from Cold
Volts / Hz
Amperage
Motor Watts
* XX may be blank, alphanumeric or symbol.
Introduction
Thank you for choosing this shredder from Swingline. Please
review these instructions to ensure you are operating the
shredder correctly.

Safety First

To guard against injury, the following basic safety precautions
must be observed in the set-up of this product.
• Ensure the machine is plugged into an easily accessible
power outlet, and ensure the cable is not likely to trip up a
passer by.
• Any attempt to repair this unit by unqualified personnel will
invalidate the warranty. Please return to supplier.
• Unplug your shredder before moving it or when it is not in
use for an extended period of time.
• Do NOT operate with a damaged power supply cord or plug,
after it malfunctions, or after it has been damaged in any
manner.
• Do NOT overload electrical outlets beyond capacity as this
can result in fire or electrical shock.
• The socket-outlet should be near the equipment and should
be easily accessible.
• Do NOT alter the attachment plug. The plug is configured for
the appropriate electrical supply.
• Do NOT use near water.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
• Do NOT load the auto-feed chamber with unopened junk
mail, magazines, bound documents etc.
Although this shredder has been designed to comply with
UL 60950 safety standards including the "probe accessibility
tests", do not operate the shredder near children or pets.
4
TM/MC
Swingline
Stack-and-Shred 750X
1757578XX*
12 sheets (20lb)
750 sheets (20lb)
Continuous
Continuous
120V / 60Hz
3.5 Amps
380 Watts
m
Description of Product Parts
U ON/OFF switch (at the rear of the shredder) A
U Important safety symbols
B
(see Safety First section below)
U Jam free indicator C
U Paper loading door handle
D
U Paper loading door E
U Door for bin F
U Continuous jam boost button
G
U Auto button H
U Reverse button
I
U Paper loading door locking mechanism –
J
PIN password buttons
U Indicator panel K
U Casters
L
U Manual feed entry slot M
U Credit card entry slot
N
U CD entry slot
O
U CD bin 'in use' location P
U Paper stack viewing window
Q
U Handles to move product R
U CD bin in storage location
S
U Comb bind removal hooks
T
U Internal storage pockets
U
U Oil reservoir cap
V
Safety First
This means you should be careful because long hair can
become entangled in the cutters.
This means be careful of ties and other loose clothing
which could become entangled in the cutters.
This means be careful of loose jewellery which could
become entangled in the cutters.
This means don't reach into the feed opening of the
cutting head.
This means keep children away from shredder.
This means no aerosols.
This means do not insert credit cards into the manual
feed slot. Use internal credit card position.*
This means do not insert CDs/DVDs into the manual
feed slot. Use internal CD/DVD position.*
Sheet capacity of manual feed entry slot.
This means the shredder can accept small staples.
This means the shredder can accept small paperclips.
This means no oil lubrication, use Swingline oil sheets only.
(*See CD/DVD Shredding on page 7and Credit Card shredding sections
on page 8).