Descargar Imprimir esta página

Matco Tools MCL162P Instrucciones De Operación página 7

Lijadora/pulidora de preparación de superficie 16v

Publicidad

Idiomas disponibles

Idiomas disponibles

MATCO MCL162P TOOL
Matco warrants this tool for a period of 2 years to the
consumer . We will repair/replace at our discretion any tool that
is found to be defective during the warranty period . In order
to have your tool repaired, return the tool to any of Matco
authorized warranty centers listed, freight prepaid . Please
include a copy of your proof of purchase and a brief description
of the problem . The tool will be inspected and if any part or
parts are found to be defective Matco will repair/replace under
warranty .
Defective products must be returned and analyzed by
VIS for the United States or HT Pneumatic Rebuilders for
Canada, at the addresses listed below, freight prepaid . Any
tool that has been serviced by the user or by an unauthorized
service center will subsequently void the warranty of the tool .
This warranty does not apply to damage that Matco determines
to be caused from repairs made or attempted by anyone other
than Matco authorized Repair centers . Misuse, abuse, normal
wear and tear, and lack of maintenance do not constitute
warranty .
MCL162P
MCL162P 16V Surface Prep Sander/ Polisher
MATCO CORDLESS WARRANTY
MATCO 16V LITHIUM-ION
BATTERY MCL1620LB/ CHARGER MCL16CHRG
Matco Tools warrants its 16V Lithium-ion (battery/charger) to
be free from defects in material and workmanship for a period
of (2) years from the original date of purchase . Registration is
required through your local authorized Matco distributor and/
or by submission of completed registration form included
with the product . If the battery/charger should fail within the
warranty period, it must be returned and analyzed by VIS or HT
Pneumatic Rebuilders for Canada at the addresses listed below,
freight prepaid . A battery capacity defect could be defined as
the battery no longer accepting a charge, or holding a charge
for the battery manufacturing specified period as determined
by Matco Tools Repair center . Based on the evaluation, Matco
Tools, at their discretion, will either repair or replace any
batteries to be found defective in material or workmanship
at no charge . Please see Matco Battery Care Guide in the
Cordless Operating Manual for any of the Infinium products . You
will find helpful tips that may maximize the useful life of your
battery .
Address for Returns as follows:
VIS Repair and Service
315 Hawkins Rd .
Travelers Rest, SC 29690
(864) 660-8286
HT Pneumatic Rebuilders
22 Goodmark Place Unit #8
Toronto, ON M9W 6R2 Canada
(416) 231-0172
7
rev 11/30/17

Publicidad

loading