Publicidad
Idiomas disponibles
Idiomas disponibles
f_
f_
o=
Maintenance
General Recommendations
Regular maintenancewill improve the performance and
extend the life of the pressure washer. Seeany qualified
dealer for service.
The pressure washer's warranty does not cover items that
have been subjected to operator abuse or negligence. To
receivefull value from the warranty, the operator must
maintain the pressure washer as instructed in this manual
and in the engine manual, including proper storage as
detailed in Winter Storageand Long Term Storage.
NOTE:Should you have questions about replacing
components on your pressure washer, pleasecall
(888) 611-6708 for assistance.
• Some adjustments will need to be made periodically to
properly maintain your pressure washer. Checkthe
spray gun and nozzle extension assembly for wear.
• All maintenance in this manual and the engine
operator's manual should be made at least once each
season.
• Oncea year you should clean or replacethe spark plug,
clean or replacethe air filter. A new spark plug and
clean air filter assure proper fuel-air mixture and help
your engine run better and last longer. Please refer to
your engine operator's manual for more details.
Before Each Use
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screen for damage.
4. Check high pressure hose for leaks.
5. Check detergent siphoning tube and filter for damage.
6. Checkspray gun and nozzle extension assembly for
leaks.
7. Rinse out garden hose to flush out debris.
Pump Oil
DONOT attempt any oil maintenanceon this pump. The
pump is pre-lubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
Pressure Washer Maintenance
Clean Debris
Daily or before use, clean accumulated debris from pressure
washer. Keep linkage, spring and controls clean. Keeparea
around and behind muffler free from any combustible debris.
Inspect cooling air slots and openings on the pressure
washer. These openings must be kept clean and
unobstructed.
Pressure washer parts should be kept clean to reducethe
risk of overheating and ignition of accumulated debris.
• Use a damp cloth to wipe exterior surfaces clean.
[
NOTICE
l Improper treatment of pressure washer can damage it and
shorten its life.
L DONOTinsertanyobjectsthroughcoolingslots.
• Use a soft bristle brush to loosen caked on dirt, oil, etc.
• Use a vacuum cleanerto pick up loose dirt and debris.
Check and Clean inlet Screen
Examine the screen on the pump's water inlet. Clean it if the
screen is clogged or replace it if screen is damaged.
CheckHigh PressureHose
The high pressure hose can develop leaksfrom wear,
kinking, or abuse. Inspect the hose each time before using it.
Checkfor cuts, leaks, abrasions or bulging of cover, damage
or movement of couplings. If any of these conditions exist,
re )lace the hose immediately.
WARNING
The high pressure stream of water that this
1_
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
)ossible amputation.
• NEVER repairhigh pressure hose.Replace it.
, Replacement hoseratingMUSTexceed maximumpressure
ratingof unit.
Check Detergent Siphoning Tube
Examine the filter on the detergent tube and clean if clogged.
The tube should fit tightly on the barbed fitting. Examine the
tube for leaks or tears. Replacethe filter or tube if either is
damaged.
16
www.troybilt.com
Publicidad
