English
–
Do not use the appliance for anything other than its intended use.
–
This appliance is intended for household use only.
–
Regulations concerning the disposal of the oil when scraping the
appliance have to be followed.
–
Any repairs that need to be done to the heater must be referred to an
authorized service agent only.
–
Warning! The appliance remains hot even when it has been switched off!
Allow to cool completely before packing away.
–
If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent in order to avoid a hazard.
–
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
–
This heater is filled with a precise quantity of specialist oil. Repairs requiring
opening of the oil container are only to be made by the manufacturer or
his service agent who should be contacted if there is an oil leakage.
Regulations' concerning the disposal of the oil when scrapping the
appliance has to be followed.
Children and infirm persons
In order to ensure your children's safety, please keep all packaging (plastic
bags, boxes, polystyrene etc.) out of their reach.
Do not allow small children to play with the foil as there is a danger of
suffocation!
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Cleaning and user maintenance shall not be made by
children unless they are older 8 years and supervised.
Young children should be supervised to ensure that they do not play with the
appliance.
WARNING: In order to avoid overheating, never under any circumstances cover
the appliances during operation, as this would lead to dangerous overheating.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
cut-out, this appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly switched on
and off by the utility.
2
Instructions for use