Altuna professional AB25 Manual De Uso página 32

ALTUNA AB25
CLEANING AND DISINFECTING OF THE CUTTING
HEAD : - CLEANING AND DISINFECTION OF THE
CUTTING HEAD
The cutting head can be cleaned to remove any residue (sap, etc.).
For this purpose, it is recommended to use the reference ecological spray can. It is also possible
to disinfect the cutting head to prevent the spread of diseases in the wood. To do this, we
recommend avoiding the use of corrosive products that could damage the device. Do not
hesitate to contact us so that we can help you select your products.
MAINTENANCE OF THE SCISSORS
1. Do not cut branches beyond the diameter indicated, do not cut hard items such as
metal, stone or any other non-plant material.
2. If the blades are worn or damaged, replace them.
3. Keep the mower clean, use a clean cloth to clean the mower, battery and charger (do not use
any abrasive or solvent based cleaners), use a soft brush to clean dust from the mower
head.
4. Do not immerse the mower, battery or charger in any liquid.
5. Follow the instructions given for the correct use of the mower, do not use the mower
when the mower, battery or charger is damaged.
6. Do not use the pruning shear if it cannot operate or shut off properly, send it for service
immediately. It is dangerous to use the pruning shear if the tool does not operate or shuts off
properly.
7. Ensure that the pruning shear is switched off during any adjustment, change of
accessories or storage. This protective measure is intended to reduce the risk of accidental
activation of the pruning shear.
8. Please make sure the blades are closed when not in use, storage of the mower should be
kept out of the reach of CHILDREN, do not allow use by anyone who is not familiar with the
operation of the mower, do not allow use by anyone who is not familiar with the operation
of the mower, do not allow use by anyone who is not familiar with the operation of the
mower.
mower or with the instruction for using the mower. It is dangerous to operate the mower
without proper training and understanding.
9. Use of the pruning shear must comply with the instructions given in this manual and the
methods of use, as well as taking into account the working environment and the nature of the
work being carried out. Use of the pruning shear outside its capacity and specifications is
dangerous.
10. Remove all dirt from the movable and fixed blades after each use, then apply lubricant to the
side of the blade where the movable and fixed blades come into contact. This will ensure that
the blades remain in good condition and reduce resistance during use, prolonging the life
of the mower and the blades.
.
12
EN