LG LDPH797 Serie Manual Del Propietário página 29

Cycle
Steam
Flex Zone
High
Temp.
Available
Options
Dry Boost
Night Dry
Delay
Start
* Default setting
** Option cannot be turned off
NOTE
• Actual water consumption will vary depending on soil level and hardness of water.
• The actual running time and cycle time displayed may change depending on options chosen, soil level,
water temperature, and hardness of water. Therefore, display time and actual running time can be
different.
• Options are not available for Download Cycle. The Machine Clean cycle is the default Download Cycle.
Using the Option Setting Mode
You can set various options by using the Option
Setting Mode.
1
Ensure the appliance is off.
2
Press Power and Remote Start
a
simultaneously to enter the Option Setting
Mode.
3
Refer to the table to set up each function.
Function Button
Machine
Clean Night Dry
Reminder
Rinse Aid
Dry Boost
Level
Clean High
Light Temp.
Auto Normal
# #
# #
# #
# #
*
# #
# #
b
Display
Off On
&
L2 ~ L3 ~ L4 ~ L0
~ L1 ~ L2 ~
On Off
&
Heavy Delicate
* *
# #
#
#
# #
* *
# #
# #
Function Button
Chime
1 Hour
Sound
Auto
Delicate
Setting
End Sound Heavy
NOTE
• Machine Clean Reminder
- The Machine Clean LED flashes every 30
cycles. You can activate or deactivate the LED.
• Rinse Aid Level
- You can adjust the level of rinse aid from L0 to
L4.
- For more information, refer to the Rinse Aid
Dispenser Adjustment section.
• Clean Light
- The default ON setting keeps the green light
on until the door is opened. If the setting is
changed to OFF, the green light turns off after
90 seconds.
• Chime Sound
- You can turn on/off the volume of the button
sound or notification sound.
OPERATION 29
1 Hour Refresh
**
#
#
# #
* *
# #
# #
Display
On & Off
On & Off
On & Off