11. Regularly clean and scour out the kettle, but can't allow the kettle,
especially the heating base, be immersed in water.
12. The appliance must not be immersed in water.
13. This appliance is not intender for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience any knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety;
14. Children should be supervised to ensure that they do not play with the
appliance.
15. If the supply cord is damaged, it must be replaced by the manufacture,
its service agent or similarly qualified persons in order to avoid a hazard.
OPERATION GUIDELINES
1. Filling water
- The capacity of filled water is limited by the ultimate lime graduated on
the kettle body.
It should not be higher than the max line, nor lower than the minimum line.
- On filling water, care should be taken to avoid water column flowing on
the kettle's outside surface.
2. Placement
- Place the kettle on a stable flat surface.
- Never heat the kettle on any wet surface, do not allow water to penetrate
the electrical parts inside the kettle
- Do not position the kettle on or near hot surface or near open flames.
3. Switching on
- Insert the main plug on the power cord into the wall socket.
- Please take care that the power cord must be well located any can't be
caught on by a passerby.
- Push the restoring switch.
- The red indicator lamp brights, it indicates that the kettle is heating.
4. Boiling
- The kettle is automatically switched off several seconds after the water
is boiling.
- The red indicator lamp goes out as switch off.
- After the kettle has switch off, it will need sometime to cool down. Almost
after 15 seconds, the kettles can be switched on again by manual