Tools Required; Parts Included; Need Help - Johnson Livestrong LS8.0T Manual Del Propietário

TOOLS REQUIRED:

 6 mm T-Wrench (included)
 6 mm L-Wrench (included)
 Screwdriver (not included)

PARTS INCLUDED:

 2 Console Masts
 1 Console Assembly
 1 Hardware Kit
 1 Safety Key
 1 Power Cord
 1 Audio Adapter Cable
 1 Bottle of Silicone Lubricant
(for 2 applications)

NEED HELP?

If you have questions or if there
are any missing parts, contact
Customer Tech Support. Contact
information is located on the
back cover of this manual.
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place
a protective covering on your floor. Take CAUTION when handling and transporting
this unit. Never open box when it is on its side. Once the banding straps have been
removed, do not lift or transport this unit unless it is fully assembled and in the upright
folded position, with the lock latch secure. Unpack and assemble the unit where it
will be used. The enclosed treadmill is equipped with high-pressure shocks and may
spring open if mishandled. Never grab hold of any portion of the incline frame and
attempt to lift or move the treadmill.
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove
the plastic wrap from console masts.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded. It is recommended you complete the full assembly of your
unit before completely tightening any ONE bolt. Several parts have been pre-
lubricated to aid in assembly and usage. Please do not wipe this off. If you have
difficulty, a light application of lithium bike grease is recommended.
9