Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 Registering Camera
The baby unit has already been registered. You do not need to register ii again unless the
baby unit loses connection with the parent unit. Learn section
for more details.
3.3 Night Vision
There are 6 infrared LEDs for picking up clear images in the dark.
3.4 Voice Function
Press and hold PTT key on the parent unit to speak to your baby through the baby unit's
loudspeaker. A microphone icon
3.5 Adjusting the Volume
Al the monitoring interface, press Volume- key to decrease volume or Volume+ key to
increase volume. After adjustment, the volume icon will be displayed for 3 seconds.
3.6 VOX Function
Press VOX Key to activate VOX mode. In VOX mode, the screen will go into sleep
automatically to save energy. It will reactivate automatically, when it detects any sound that
reaches to the Mic on the camera. Press VOX Key again to return to Normal mode.
3.7 Adjusting the Backlight
At the monitoring interface, press "Left" key to decrease the screen brightness or "Right" key
to increase ii. After adjustment, the brightness icon will be displayed for 3 seconds.
3.8 Zoom Function
At the monitoring interface, press "zoom key" to zoom in the image on the screen. There are
three levels of magnification (switching in cycle).
3.9 Audio Mode
At the monitoring interface, press "Power/ Return Key" to activate audio mode. In audio mode,
the screen will be turned off, but audio transmission keeps on working. It can save power
when you don't need images. Press any button to exit audio mode.
4. Monitoring Screen Icons
1234567
8
will
appear on the screen.
10 11
12
9
'5.2 Camera Registration'
1. Signal Strength Indicator
2.Viewing camera
3. Temperature around the camera
4. VOX Mode Activated
5. Alarm Activated
6. Time
7. Battery Indicator
8. Backlight Brightness Bar
9. Volume Bar
10. Lullaby is Playing
11. Zoom Level
12. PT T Function Activated
13
Publicidad
