Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURE & COMPONENTS:
Upper Latch Set
Gate Frame
Release
Button -
Lower
Latch
Set —
Gate Panel
5" Extension Frame
Wrench
Extension Pins
(4)
Tension Bolts
(4)
Mounting Cups
(4)
SET-UP:
Step 1: Measure the width of the opening where you intend to install the gate.
Please refer to the following pictures to determine the correct installation
configuration.
FIGURE A
FIGURE B
FIGURE C
FIGURE D
extension frames
5" extension frame
(38" - 43") with
10" extension frame
(43" - 47.5") with both 5" and
10" extension frames
Step 2: To use with one or two extension
frames, assemble as shown in Figure E.
Warning: Do not install two extension
frames on the same side of the gate.
Step 3: Screw the tension knobs onto the
tension bolts until they contact the pads. Insert
4 tension bolts into holes on outside and slide
inward toward frame as far as possible.
2
Publicidad
