Publicidad
Idiomas disponibles
Idiomas disponibles
For natural gas connection
Main Gas Pipe
Gasket
Nut
Natural Gas
Connection Hose
Gas hose passage way
Figure 1
Figure 2
WARNING: Before placint the appliance, check that the local distribution
conditions (gas type and pressure) conform to the product settings.
WARNING: Natural gas connection should
be done by authorized service.
For natural gas connection, place gasket in
the nut at the edge of natural gas connection hose.
To install the hose on main gas pipe, turn the
nut. Complete the connection by making gas
leakage control.
Connect the appliance to the gas piping tap in
shortest possible route and in a way that
ensure no gas leakage will occur.
In order to carry on a tightness and sealing
safety check ensure that the knobs on the
control panel are closed and the gas cylindir is
open.
WARNING: While performing a gas leakage
check, never use any kind of lighter, match,
cigarette or similar burning substance. Apply
soap bubble on the connection points. If there
is any kind of leakage then it will cause
bubbling.
While inserting the appliance in place ensure that
it is on the same level with the worktop. If
required adjust the legs inorder the make level
with the worktop.
Use the appliance on a level surface and in a well
ventilated environment.
17
V.1
Publicidad
