Installation instructions
[]
[]
REMOVE
THE
REFRIGERATOR
DOOR (cont.)
Lift the refrigerator
door up and off the
bottom
hinge.
If the refrigerator
has a refreshment
center,
one person
should
slowly
lift the
door
up and off the bottom
hinge
and the
second
person
should
carefully
guide
the
electrical
lines
(harnesses)
through
the
bottom
hinge.
Refreshment Center Models Only
[]
Set the door
on a non-scratching
surface
with
the inside
up.
[] REPLACING THE DOORS
To replace
the doors,
simply
reverse
steps
3 through
8.
However,
please
note the following:
• When
lowering
the doors
onto the
bottom
hinges,
make
sure the second
person
carefully
guides
the tube
and
harnesses
through
the holes
in the
hinges.
• When
connecting
the water
line, make
sure you
insert
the tubing
all the way
to the mark.
Mark
• Do not pinch
the tubing
and harnesses
when
placing
the doors
on the bottom
hinges.
• When
connecting
the power
line and
the electrical
lines (refreshment
center
models
only),
be sure that the
connectors
are seated
together
fully.
27