GE AEW24 Manual Del Propietario Y Instrucciones De Instalación página 14

Installation Instructions
6. INSTALL THE AIR CONDITIONER
IN THE CASE (continues)
B.
Replace the 1 screw removed earlier, one
on each side of the case.
C.
Reinstall the control to the panel housing by
replacing the 2 screws you removed earlier.
Install Screws
D.
Attach the front grille to the case by inserting the
tabs on the grille into the slots on the front top of
the case. Push the grille in.
E. Replace the screws.
F. Install the filter and the front grille.
G. Plug in the air conditioner.
14
7. INSTALL FOAM INSULATION
Additional insulation is provided with your
window air conditioner to reduce heat
leakage into the home, reducing overall
energy usage.
A. After the air conditioner is installed in the
window measure the length of the accordion
for both sides.
B. Cut the foam insulation to the measured
length of the left and right side accordion.
because the length could be different on
each side.
C. Remove adhesive from back of foam
insulation. Stick the foam insulation onto
the left and right accordion, and inside of the
frames.
NOTE: be careful to cover the entire
accordion.
49-7789