Publicidad
Idiomas disponibles
Idiomas disponibles
HIGH INPUT diagram
BLUE WIRE
GRAY WIRE
AUTO TURN-ON RESOURCE
Allows the amplifier to turn on automatically when it
receives a signal on the high input connection, whitout
the need for a remote connection.
NOTE: if the level of the audio signal from your radio is
not sufficient to turn the amplifier on, use the remote
cable to turn it on.
Use the RCA and HIGH INPUT connections at the same time can cause unwanted
noise and amplifier problems.
Speakers installation
MODO STEREO
2 OHMS min.
MODO BRIDGE
4 OHMS min.
16
CH3
CH1
CH4
CH2
Use example:
4 x SPEAKERS 2 OHMS
2 x SPEAKERS 2 OHMS +
1 x SUBWOOFER 4 OHMS (BRIDGE)
2 x SUBWOOFER 4 OHMS (BRIDGE)
SPEAKERS
13 AWG cables
Check the minimum impedance
supported by the amplifier.
CONNECTOR
CABLES
Publicidad
