Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
•
Note: If this function is enabled and the ambient temperature is
below 24°C, the fan will not operate.
•
Press the smart mode button on the base of the fan to activate or
deactivate the smart mode fan speed.
•
If activated and the ambient temperature is above 24°C, the fan
will operate and the fan speed will be automatically set and
changed according to the ambient temperature. The LED display
will always show the current ambient temperature
Night mode button
•
Press night mode button, the LED light would adjust to normal
light → night mode (lower brightness) → light Off.
USING THE DEVICE WITH PRINCESS HOME APP
•
Download the correct version of the Princess Home app via our
website princesshome.eu/nl-nl/princess-home-app or use QR:
Pair your device to the Princess Home app
10
•
Make sure your device is powered.
•
Press and hold the Mode button on the fan for 5 seconds. The
WIFI icon flashes.
•
Open the Princess Home app.
•
Select your country code, enter the cell phone number and tap
"Get" to get a message containing the verification code.
•
Enter the verification code in the message and tap "Log in" to log
in to the App.
•
Click "Add Device" to add a new device.
•
Select the device you wanted to connect.
•
Follow the instructions on the app to connect the device.
•
When the fan is connected to the app, the WIFI icon lights up.
•
To control your device with voice using a smart speaker please
refer to the manufacturer's instructions on how to enable a skill
through your device.
Publicidad
