Publicidad
Idiomas disponibles
Idiomas disponibles
LV 3450
Sprayer for doors/windows installation
You can install this sprayer (9) in the fixed nozzle (13) or
in the flexible hose (15).
Install firstly the accessory for doors/windows in the tool
for fabrics (10): insert the two openings in the bottom of
the sprayer for doors/windows in the two hooks of the
nozzle for fabrics (#1 in the picture). Then, fit together
both parts fixing them with the big hook of the sprayer
for doors/windows (#2 in the picture).
Once fixed together, insert the sprayer for fabrics in the fixed nozzle (13) or in the flexible hose (15)
according to the previous instructions.
REFILL WATER DURING OPERATION
• Unplug the power cord and disconnect the power supply.
• Press down the steam button to release the pressure until no steam is injected out.
• Slowly unscrew the safety cap but do not remove it, the residual steam will be discharged slowly
until no steam comes out. Then place the machine in a cool place to cool down for about
three/five minutes. Finally, remove completely the safety cap.
• Use a funnel and measuring cup to refill a suitable quantity of cold or hot water into the tank.
• Re-install the safety cup onto the machine body and tighten it in position.
AFTER USING THE APPLIANCE
1. After the cleaning machine is used, unplug the power cord and disconnect the power supply.
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap but not remove it, and residual steam will be discharged slowly
until no steam comes out. Then place the machine in a cool place to cool it down for about five
minutes. Finally, completely remove the safety cap.
4. Empty the residual water in the tank and clean the external surface with a piece of dry cloth.
5. At last, re-install the safety cap onto the machine body and tighten it in position.
CLEANING AND MAINTENANCE
NOTE: You must unplug the product from the mains and leave to cool before performing
•
any cleaning and maintenance task.
− Allow the product to fully cool before cleaning or putting it away.
− Empty any water remaining in the heater after each use.
− Store in a cool, dry place.
21
Publicidad
