ClicKid CAM20 Manual De Instrucciones página 9

Charging the Digital Camera Battery:
1. Ensure a Battery is Inserted: Before initiating the charging process, confirm
that the digital camera has one battery securely inserted into its designated
slot.
2. Connect to Power Source: Utilise the provided USB to micro-USB cable to
connect the digital camera either to a PC/laptop or use a USB plug for
connection to a mains plug.
3. Initiate Charging: Once connected, the digital camera will commence
charging the inserted battery. During the charging process, a red LED light
will be visibly illuminated on the camera, indicating that charging is in
progress.
4. Charging Duration: The charging process may take approximately one hour
and a half to complete.
5. Complete Charging and Battery Replacement: Once the first battery is fully
charged, disconnect the digital camera, remove the charged battery, and
insert the second one.
6. Repeat Charging Process: After securely inserting the second battery,
reconnect the camera using its USB cable to either a laptop/PC or mains,
and commence charging the second battery, which is included in the box.
By following these steps, you can effectively and sequentially charge the batteries
for your digital camera, ensuring a seamless and well-managed process.
Note: The ClicKid Li-Ion batteries can only be charged while in the digital camera.
Do not charge these batteries using other devices than the ClicKid digital camera
Additional Information
EN
.
9