DEEP GAMING G01PRO Manual De Instrucciones página 7

Connecting and switching on the headphones
1. Insert the USB receiver into a USB port on your computer. The indicator LED on the
USB receiver will flash indicating that it is waiting for a connection.
2. Press and hold the Power button on the headphones for 3 seconds to turn on the headphones.
3. When the blue LED on the Power button stops flashing, the headphones is successfully
connected.
Button Functions
Power Button (D): Press and hold to turn on or off.
Volume +/- Button (A/B): Press once to increase or decrease volume; Press and hold to
change to previous or next song.
Microphone Mute Button (C): Press to mute the microphone (the light on the USB receiver
will turn off).
Note: If the headphones is not paired with your device, you can press and hold the button for
3~5s to enter pairing mode, if the red light turns on, it indicates the headphones is paired.
Volume Up / Next Track
Volume Down / Previous Track
Mute microphone
Power button
Type-C charging port
3.5mm Jack
Microphone port
EN
7