Xiaomi ZMYDFS01DM Manual Del Usuario página 8

How to Use
Charging
It is recommended to fully charge the fan
before use.
It is recommended to use a charger of
5 V 2 A (The charger is sold separately).
Connect the included charging cable to
the charging port at the bo om of the fan.
Then connect the fan to power.
When the ba ery level indicator is blinking,
the fan is successfully connected to power.
The fan can be used when connecting or not
connecting to power. To maintain optimal
ba ery performance, it is recommended to
keep charging the fan when it is not in use.
When the fan is off, it takes about 3 hours at
most to fully charge the fan.
Ba ery Level & Indicator Description
Fan Status Ba ery Level
0%–30%
Charging
31%–99%
100%
0%
1%–30%
Working but not
31%–99%
being charged
100％
Notes:
Charge the fan with a charger of 5 V
It is recommended to charge the fan in an ambient temperature range of 15°C to 45°C.
Always charge and use the fan in a flat, stable place.
Charging Port
Ba ery Level Indicator Status
Blinking orange
Blinking white
Off
Off
Orange
White
Off
2 A and the included charging cable.
Turning On/Off
To turn on the fan for the first time, press the power bu on.
When the fan is on, turn the knob clockwise to make the fan start
working and turn the knob counterclockwise to stop the fan.
If the power bu on is used to turn off the fan, it must be used again
to turn on the fan.
Switching Speed
Turn the knob clockwise to increase the speed, and turn the knob
counterclockwise to decrease the speed. The corresponding speed
indicators are shown in the table below.
Speed Slow (1)
Indicator
Status
Note: indicates on, and indicates off.
Enabling/Disabling Oscillation
Press the knob to enable or disable the oscillation function.
5
Turbo (4)
Medium (2) Fast (3)