CamPro Safe Trap Automatic Serie Manual Del Usuario página 7

3. Technical data
Design
Type/model
Year of production
Dimensions
Dimensions
Safebox
Weight
Force
Speed
CO cartridge
2
Operating
temperature
Design life
Environmental/ambient conditions
Ambient temperature (min, max)
Relative humidity
Communication/connection
Digital input/output
Interfaces
Compliance
According to 2006/42/EF DS/EN ISO 12100:2011 General principles for design
– risk assessment and risk reduction DS/ISO 14121-2:2012 Safety
of machinery - Risk assessment - Part 2: Practical guidance and
examples of methods
3.1. Nameplate
The product is marked in accordance with the applicable legislation requirements. The
nameplate is located on the sides of the product.
1
2
3
4
4. Transport and storage
4.1. Preparation
6 Always wear gloves when disassembling the product.
1. Remove the CO
2
2. Remove the NFC reader from the trap unit.
3. Remove the lure basket from the trap unit.
4. Trigger the trap unit with a tool or key until the pin does not respond anymore.
STA H&G
2020
19 x 7,5 x 20 cm (19 x 15 x 28,5 cm with Safety Shield)
550 gr
5G
<9 milliseconds
16 gr / 21ml
-20 °C to 49 °C
5 years
cartridge from the trap unit.
STA Safebox
30 x 13 x 36,5 cm
3100 gr
16 gr / 21 ml or 25 gr / 33,5 ml
-20 °C to 49 °C
20 – 95 %
CAMRO SafeTrapAutomatic
CAMRO SafeTrapAutomatic
1 QR-code
2 Contact information
3 Product information
4 Year of production
STA Safebox Public
50,5 x 24,5 x 25,5
cm
3350 gr
5
EN