Built to Exceed
R M
2 6 0 4
Keep Working
800W ROTARY HAMMER
1 APPLICATION
The tool is used to spray and drill wood, metal, plastics and walls. The tool is not intended for commercial use.
WARNING Paying attention to your own safety, read this user manual carefully before using the machine. Always pay these
instructions with your power tool.
2 DESCRIPTION (FIG. A)
1. Depth guide
2. SDS chuck
3. Auxiliary handle
4. Mode selector
5. Button with locking device for depth stop
6. Soft grip
7. Forward / reverse lever
8. On / off switch
9. Lock button on
10. Dust protection cover
11. Speed regulator
3 CONTENTS OF THE BOX:
• Remove all packing materials.
• Remove the remaining packing materials and transit supports (if they exist).
• Verify that the contents of the package are complete.
• Check that there is no transport damage to the equipment, the power cable, the electrical plug and all the accessories.
• Keep packaging materials for as long as possible until the end of the warranty period. Throw them out later in your local garbage
disposal system.
CARE Packaging materials are not Toys. Children should not play with plastic bags! Choking hazard
1 rotary hammer
1 Instruction Manual
3 SDS chuck (10/10/12 x 150 mm)
2 Chisel (14 x 250 mm, 1 point, 1 flat)
1 dust protection cover 1 depth indicator
KEEP WORKiNG
04