Publicidad
Idiomas disponibles
Idiomas disponibles
SOUND SYSTEM ASSEMBLY INSTRUCTIONS
If you have installed the center back panel (H) to the
mantel, please follow these steps to remove it.
1. From behind the assembled mantel, remove the
Center Back Panel (H) by unscrewing the screws
on the back panel.
2. From behind the assembly, to secure the
speaker bracket (II) to the pre drilled holes on the
middle shelf with four screws (HH).
Hardware Used
Screw
HH
Speaker Bracket
II
Wrench
JJ
3. Position sound system (R) into the top middle
opening of mantel assembly and align it with the
front of opening.
CAUTION: DO NOT slide sound system (R) on top
of wood to avoid scratching wood surface.
Do not re-attach the center back panel (H) after
the speaker is installed. You can keep it aside for
future use.
1
2
x 4
x 2
x 1
3
12
H
HH
II
JJ
HH
II
R
Publicidad
