Publicidad
Idiomas disponibles
Idiomas disponibles
Range
Setting
Range
Range Setting
Range
Setting
Setting
Walk in the area to be tested. (FIG.5)(FIG.6). When your motion
is detected, the lights will turn on. The detected area will reach 50
feet when RANGE dial had been turned to MAX.
FIG.5
Operation:
Operation:
Operation:
Operation:
Place the sensor switch in the 1 or 5 minute mode for normal
operation. Actual normal operating time will vary depending upon
how frequently the light is turned on by the motion sensor and
amount of sunlight collected. To disable the light, place the switch
in the OFF position.
Mode
On-Time
Test
5 Seconds
Auto
1 or 5 Minutes
Charging
Charging
the
the
battery:
battery:
Charging
Charging the
the battery:
battery:
For optimum performance, it is best to install the solar light in full
sunlight and charge for 10-12 hours. Allow the light to run at least
8-12 entire charging and discharging cycles to reach battery's
maximum capacity.
REPLACING
REPLACING
THE
THE
REPLACING
REPLACING THE
THE BATTERY
For best performance, replace with three rechargeable 1.2V AA
NI-MH/CD 900mhA batteries every year or when performance
diminishes.
Works:
BATTERY
BATTERY
BATTERY
5
FIG.6
Day
Night
×
×
×
Publicidad
