Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
1 -
Pull the unit outwards from the carton and place it on a solid hot-proof horizontal surface.
2 -
Check if the accessories are complete, same as the accessories list.
3 -
Place the unit on a solid hot-proof horizontal surface. Take out the casters and caster
wrench to assemble.
Note:
Casters with skid are for the two front holes and
casters without skid are for the two back holes at
the bottom of the unit.(shown as fig.1)
4 -
Add water from the water inlet on the front
cabinet.(shown as fig.2)
Note:
1 -
Water level must be between the MIN and
MAX line.(shown as fig.2)
2 -
After some time operation, dust and dirt
may occur in water tank. It is recommended
to change the water and clean water tank
frequently.
3 -
The waste water in the water tank can be
discharged from the water outlet on the back
cabinet.(show as fig.3)
5 -
Only use the unit with correct AC outlet.
6 -
Insert the plug pin into a wall socket and turn
on the power switch which is at the side of the
unit. A small beep sound can be heard and the
power indicator will be on.
Note:
1 -
To protect against electric shock, do not
remove plug from wall outlet by wet hand.
2 -
Unplug from outlet while moving the unit.
3 -
Insert the plug pin into the wall socket and
make sure it is connected well.
EN
Fig.1
Fig.2
Fig.3
15
Publicidad
