Publicidad
Idiomas disponibles
Idiomas disponibles
1,
Connect an Optical Cable
between the "DIGITAL
AUDIO OUT (OPTICAL)"
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System
When a Digital Audio
System is connected to the
"DIGITALAUDIO OUT
(OPTICAL)" terminal:
Decrease the volume
of the TV, and adjust the
volume level with the
system's volume control
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV
Digital Audio
System
TV Rear Panel
5.1CH audio is possible when the TV is connected to an external device supporting 5tCH
:_ Each Digital Audio System has a different back panel configuration.
Connecting an Amplifier/DVD Home Theater
1,
Connect Audio Cables
between the AUDIO OUT
JR-AUDIO-L] on the TV
and AUDIO IN JR-AUDIO-
L] on the Amplifier'DVD
Home Theater.
When an audio amplifier is
connected to the "AUDIO
OUT [L-AUDIO-R]"
terminals: Decrease the
volume of the TV, and adjust
the volume level with the
Amplifier's volume control
Amplifier/DVD Home
Theater
I_
TV Rear Panel
_udie Cable (Not supplied)
Connecting a PC
Using the D-Sub Cable
1. C : rt:te:,v ; L c,N
[PC] connector on
the TV and the PC
output connector on
your computer
2,
Connect a PCAudio
Cable between PC IN
[AUDIO] jack on the
TV and the Audio Out
jack of the sound card
on your computer
Using the HDMI/DVI Cable
1,
Connect a HDMI!DVI
cable between the
HDMI1/DVI IN jack on
the TV and the PC output
jack on your computer
2,
Connect a IStereo/2RCA
cable between the DVf
IN [L-AUDIO-R] jack on
the TV and the Audio Out
jack of the sound card on
your computer
Each Amplifier DVD Home Theater has a different back panel configuration
>- When connecting an AmplifiedDVD Home Theater, match the color of the connection
terminal to the cable
Using the D-Sub Cable
TV RearPanel
/
PC Audio
Cable (Not suppIied)
TV Rear PaneI
Using the HDMI/DVI Cable
PC
HDMI/DVI
Cable (Not supplied}
Each PC has a different back panel configuration
>-When connecting a PC. match the color of the connection terminal to the cable.
>When
using an HDMI/DVl cable connection,you must use the HDMf IN1 terminal
Publicidad
