Publicidad
Idiomas disponibles
Idiomas disponibles
6440630-05_DE-EN-FR-ES_MultiBoardV2-MX.fm Seite 8 Donnerstag, 17. Februar 2022 12:27 12
OPERATING MANUAL
CHERRY MultiBoards G80-7xxx/-8xxx – Programmable Keyboards with Card Reader
Before you begin ...
Every device is different!
The operating instructions contain
information on effective and reliable
use.
• Read the operating instructions carefully.
• Keep the operating instructions and pass
EN
them on to other users.
The devices described here are keyboards for
operating PCs/laptops.
For information on other products, downloads
and much more, visit us at www.cherry.de.
Your CHERRY MultiBoard stands out especially
due to the following features:
• CHERRY MX key technology with Gold
Crosspoint contacts
• Robust and reliable
• Fully programmable USB 2.0 keyboard via
the software CHERRY Tools
• Programming can be selected – manually or
via software macros
• UnifiedPOS supported (OPOS/JavaPOS)
• Integrated memory
• Provision of statistics data via WMI (Windows
Management Instrumentation)
Alongside the functions of a standard
keyboard, the MultiBoard keyboards offer the
following additional functions depending on the
model:
8
• Magnetic card reader
• PC/SC smart card reader
• Touchpad
• Additional keys (extended layout)
• Inscribable keys
1 Status displays
The left and center LEDs show the status of the
Caps Lock key, Num-Lock key and the shift
key.
The right LED shows the status of the scroll
key or has different functions depending on the
model as outlined below:
1.1 Models with magnetic card
reader
LED ( )
Status
Lights up green for
The magnetic card
approx. 4 sec. (after
reader is ready to
connecting or
operate on the hardware
switching on the PC)
side.
Lights up green
The magnetic card has
(after the magnetic
been read correctly.
card has been
Configuration via
swiped through)
CHERRY Tools: On/Off
and light-up duration
(Standard: On, 200 ms).
1.2 Models G80-7040, G80-8040
(with smart card reader)
LED (
)
Status
Lights up green
The smart card reader is
constantly (after
ready to operate on the
connecting or
hardware side.
switching on the PC)
Flashes red
Communication with the
smart card.
1.3 Models G80-7044, G80-8044
(with smart card reader)
LED (
)
Status
Lights up
• Upon connecting the
briefly
SmartTerminal to the PC:
Terminal operational
• Upon inserting the card:
Card detected
Flickers
Data transfer from or to the
card
Flashes
Error
intermittently
Publicidad
