BOLERO Y829 Manual De Instrucciones página 10

UK
Step 1 - First Section
Take two #4 poles and lay them on the floor alongside each other.
1.
Slot a foot into the bottom of each pole and secure with a nut and bolt.
2.
Note: The bottom end of the pole has a hole through it to fit the bolt.
Slot connecting piece A on to the top end of the two poles and connect them with one #2 pole.
3.
Note: If the pole has a spring button, ensure it fully engages with the hole in the
connector.
Take two more #4 poles and attach a foot to each.
4.
Attach connecting piece B to one pole and connecting piece C to the other.
5.
Connect them to either side of the first poles with #2 poles.
6.
Step 2 - Second Section
Note: Build Section 2 opposite and facing Section 1.
Repeat the steps of Section 1 to make an identical frame.
Note: Ensure that connecting pieces B and C are on different sides of the two sections.
Step 3 - Join the Sections
With the two sections opposite each other, connect them with two #2 poles.
Step 4 - The Roof
Starting at one end of the frame, insert four #1 poles into the connecting pieces, joining them
1.
together at the top with one central connecting piece.
Note: Once connected there should be one empty slot pointing towards the other end of
the frame.
Repeat for the other side of the frame.
2.
Join the two central connecting pieces with the #3 pole.
3.
The frame is now complete.
4.
Step 5 - Secure the Frame
With the frame in the correct position:
Push ground pegs through the holes in each pole foot to secure the Gazebo frame to the ground.
1.
3