Descargar Imprimir esta página

Helvex TF 110-WC-4,8 Instructivo De Instalación página 14

Fluxometro de baterías con auto-flux para w.c.
Ocultar thumbs Ver también para TF 110-WC-4,8:

Publicidad

Rondana de hule
Handle washer
Tensión de alimentación 6 Vcc.
Consumo de energía 3 W.
Utiliza 4 baterías alcalinas tipo "C"
1,5 Vcc.
Fluxómetro baterías con Auto-Flux / Auto-Flux sensor flush valve
Recomendaciones de mantenimiento
Maintenance recommendations
Empaque
Conical washer
Características eléctricas / Electric characteristics
1.- Limpieza de émbolo.
Desarme el émbolo como muestra la
figura y límpielo de posibles impurezas,
reemplace si es necesario.
1.- Piston cleaning.
Disassemble the piston as show in the
drawing and clean any studge.
If necesary replace.
2.- Revisión de empaques del auto-flux
Desarme el auto-flux como muestra la
figura, verifique que no este gastado el
empaque cónico y la rondana de hule y
límpielos de posibles impurezas.
2.- Seal
revision
of the auto flush
Dismantle the electronic flush valve as
show in the figure, verify that the conical
washer is not worn out and that the handle
washer is clean of possible sludge.
Feeding voltage 6 Vcc.
Current drain 3 W.
Use 4 batteries alkaline type "C"
1,5 Vcc.

Publicidad

loading