Glacier bay HD67799W-1108D2 Guía De Instalación Y Cuidado página 18

Installation
1
Preparing for installation
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply.
Unscrew the nut (D), and remove the
washers (B & C).
2
A
B
C
D
18
Installing the faucet assembly
Before installation, ensure that the flange (F)
is placed on the bottom of the new faucet
assembly (A).
Insert the faucet assembly (A) through the hole
in the sink.
F
A