DUROFIX RW1210 Manual Información Del Producto página 8

INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 2A), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig. 2B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
B
A
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (see Fig.3).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
1English1
SPECIFICATIONS
Model Number
Voltage
Drive
Max. Torque
No Load Speed
Tool Weight
ASSEMBLY
Fig. 2
Fig. 3
English
RW1210
12 Vdc
1/4"sq. 3/8" sq.
45 ft-lbs 65 ft-lbs
60 Nm 88 Nm
0-195 RPM
3.08 lbs(1.4kg)
-7
1/2"sq.
70 ft-lbs
95 Nm