Anker PowerConf+ Manual De Instrucciones página 4

b) Connect to PC (USB-C cable)
C) Connect to smartphone (Bluetooth pairing)
When powered on, PowerConf+ will automatically enter the Bluetooth pairing mode.
Select "Anker PowerConf" on your smartphone's Bluetooth list to connect.
Press Enter pairing mode
Flashes blue Bluetooth pairing
Steady blue Bluetooth connected
04 EN
Anker PowerConf
• Each time you power on PowerConf+, it will automatically connect with
the last successfully connected device if available.
• To disconnect Bluetooth, press the Bluetoth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED
will light on clockwise and then fade out.
To power off, press and hold the power button for 2 seconds.
• PowerConf+ will automatically power on once connected to your PC by
using the USB-C cable.
• PowerConf+ will automatically power off after 30 minutes of inactivity or
no source.
2"
EN 05