IKEA TRETAKT Manual De Instrucciones página 5

Pairing a steering device to your
smart plug
When the smart plug is sold together
with a remote (in the same package),
they are already paired. To add more
smart plugs, just repeat the steps
below:
1. Make sure that your smart plug is
plugged in, and the main power is
turned on.
2. Hold the steering device close to
the smart plug you want to add (no
more than 5 cm away).
3. Press and hold the Pairing button
for at least 10 seconds. A red LED
will steadily shine on the steering
device. On your smart plug a white
light will begin to dim and flash one
time to indicate that it has been
successfully paired.
5