Publicidad
Idiomas disponibles
Idiomas disponibles
ACTIVATING AND PROGRAMMING MODES
ACTIVATING MAXIMUM CONTINUOUS MODE
1. Turn the on/off switch (3) to position II (CONTINUOUS OP.). The BREEZER machine
will start producing the fragrance at maximum power and without interruption.
2. If you would like to interrupt the operation of the machine, you can turn it off by turning
the on/off switch (3) to the "0" position or cut off the power to the machine.
When the machine begins to receive electrical power once again, it will resume
operation.
ACTIVATING AND PROGRAMMING THE REGULATED CONTINUOUS MODE
1. Turn the on/off switch (3) to position I (TIMER OP.).
2. Press the "Disabled" button (5) to disable the weekly timer (4). The "DISABLED" LED
light should turn on. If this is not the case, press the button again.
3. To set the desired intensity, follow the steps indicated in the REGULATING INTENSITY
section.
4. If you would like to interrupt the operation of the machine, you can turn it off by turning
the on/off switch (3) to the "0" position or cut off the power to the machine. When the
machine begins to receive electrical power once again, it will resume operation.
INSTRUCTION MANUAL
6
ENG
Publicidad
