Publicidad
Idiomas disponibles
Idiomas disponibles
ACTIVATING AND PROGRAMMING THE REGULATED WEEKLY TIMER MODE.
1. Turn the on/off switch (3) to position I (TIMER OP.).
2. Press the "Disabled" button (5) to turn on the weekly timer (4). The "Disabled" LED light
should turn off. If this is not the case, press the button again.
3. Program the current date and time. To do so, press the "Time Edit" button (6). The year
will appear on the display.
4. Select the current year by pressing edit buttons A (7) and B (8).
5. Press the "Time Edit" button (6) again. The number of the month will appear on
the display.
6. Select the current month by pressing edit buttons A (7) and B (8).
7. Press the "Time Edit" button (6) again. The day of the month will appear on the display.
8. Select the day of the current month by pressing edit buttons A (7) and B (8).
9. Press the "Time Edit" button (6) again. An abbreviation of the day of the week (in
English) will appear on the display.
10. Select the current day of the week by pressing edit buttons A (7) and B (8).
11. Press the "Time Edit" button (6) again. The time will appear on the display.
12. Select the current time by pressing edit buttons A (7), B (8) and C (9). Button A (7) will
modify the time, button B (8) will modify the minutes and button C (9) will modify the
seconds.
13. Press the "Time Edit" button (6) again to finish entering the current date and time.
INSTRUCTION MANUAL
7
ENG
Publicidad
