Publicidad
Idiomas disponibles
Idiomas disponibles
3. Insert back panel (D) into seat (C).
4. Assemble back panel (D) to right arm (A)
and left arm (B) with long bolts (BB) and
washers (CC).
Check alignment of all hardware and make
any necessary corrections. Then, securely
tighten all bolts with hex wrench (EE). Cover
all bolts with bolt covers (DD).
Hardware Used
Long Bolt
BB
Washer
CC
Bolt Cover
DD
Hex Wrench
EE
CARE AND MAINTENANCE
•
Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help
prevent mildew by washing out dirt particles that may become trapped. Shake out excess
moisture after rinsing and allow to dry thoroughly before storing.
3
4
DD
BB
CC
x 2
A
x 2
x 6
x 1
4
Lowes.com/allenandroth
D
C
D
B
Publicidad
