EN
5. SAFETY
• The installation of DC power must be handled by a qualified electrician.
• Make sure to connect power to the suitable voltage socket.
• No electrical devices are to be used inside the product.
• The product can be powered on only after being unpacked and put on a flat level
surface for over 6 hours.
• Product must be well ventilated. Ensure there is a minimum of 200mm clearance at the back,
and 100mm around the sides.
• The product should be installed away from heat sources. Try to avoid direct exposure to sunlight.
• When there is water inside the fridge, do not turn the product upside down to empty.
Dry the water with a soft cloth instead.
• Do not put metal in the air inlet vent outlet vent or gap.
• Do not connect to other power except 12V /24 VDC.
• Do not soak the product in water or wash with water.
• The product should not be repaired. lf there is any issues please consult the place of purchase.
• Turn oft the product before cleaning to avoid electric shocks or other issues.
• Keep product away from wet or humid places.
CARBEST CampCooler| 71456 / 71457 / 71458
14