EN-3
Battery handling and usage
Only adults should handle batteries.
The product is supplied with 2x rechargeable 600 mhA 2.4V Ni-MH batteries
incorporated in the manicure hand held device which are not accessible and cannot be
replaced. Therefore when the product reaches the end of its useful life it must be
disposed of at a recycling centre.
OPERATION
Before using, make sure that the manicure hand held device is fully charged.
Charging the manicure hand held device
The hand held device can be used cordlessly or by using the power adapter.
For cordless use, you have to charge the hand held device for at least 24 hours for
the first use to ensure the batteries are fully charged.
There are two ways to charge the manicure hand held device.
A. In the travel case
1. Connect the travel case to the power adapter and plug the power adapter into the
mains socket.
2. Press the cover release button to open the travel case cover.
Cover release
button
3. Switch off the hand held device and place it in the travel case.
4. Insert the charging plug into the charging socket on the main unit.