Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Use the adaptor
The auger shaft measures 7/8'' in diameter. It will
work with most universal-sized bits designed for
this size of shaft. This product is also equipped
with an adaptor that can convert the auger shaft to
7/10'' in diameter for wide application.
•
Insert the adaptor (F) between the auger shaft
(H) and the new auger bit (not included).
•
Open the ring pin (AA).
•
Insert the ring pin (AA) through the holes.
•
Close and lock the ring pin (AA) to secure the
auger bit to the auger shaft.
Hardware Used
AA
Ring pin
3a
3b
x 2
12
H
F
AA
AA
Publicidad
