Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
Work area safety
•
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate products in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Products create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while operating a product. Distractions can cause you to
lose control.
Electrical safety
•
Product plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) products. Unmodified plugs and matching outlets will
reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
•
Do not expose products to rain or wet conditions. Water entering a product will increase the
risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the product.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
•
When operating a product outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
•
If operating a product in a damp location is unavoidable, use a RESIDUAL CURRENT
DEVICE (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
•
Stay alert, watch what you are doing and use common sense when operating a product.
Do not use a product while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating products may result in serious personal
injury.
•
Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
•
Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying products with
your finger on the switch or energising products that have the switch on invites accidents.
•
Remove any adjusting key or wrench before turning the product on. A wrench or a key left
attached to a rotating part of the product may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times. This enables better control
of the product in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewelery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelery or long hair can be caught in moving
parts.
•
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust related
hazards.
•
Do not let familiarity gained from frequent use of tools allow you to become complacent
and ignore tool safety principles. A careless action can cause severe injury within a fraction of
a second.
7
Publicidad
