Jackery SolarSaga 100 Guia Del Usuario página 4

US
* Under normal circumstances, PV modules may be exposed to higher currents or voltages than under
standard test conditions. Therefore, when calculating the rated voltage of component, the rated
current of conductor, and the size of the control device connected to the PV output, it is required to
multiply the short-circuit current (Isc) and open circuit voltage (Voc) values marked on the component
by a factor of 1.25.
* Any damage to the product may lead to electric shock or fire.
* Do not let artificial spotlight shine directly on the solar modules or panels.
HOW TO USE
Connect the cable to the solar panel and the DC input port of the portable power station.
Tip: The cable comes with an adapter that allows it to connect to Jackery portable power station.
1. DC8020 connector: suitable for the DC input port of Jackery portable power station (diameter: 8.1 mm).
2. DC8020-DC7909 adapter: suitable for the DC input port of Jackery portable power station (diameter: 8.0 mm).
This multifunctional solar charging cable is only suitable for charging the Jackery SolarSaga 100 and
should not be used with other solar panels.
When using the Solar Panel Connector
Connect the two solar panels to the solar panel connector respectively and then connect the solar panel
connector to the DC input port of the portable power station.
※ To maximize the power generation, adjust the orientation of SolarSaga 100 throughout the day to
ensure full exposure of the panel surface to direct sunlight.
Sun Angle Indicator
The carry handle has a sun angle indicator. When sunlight hits its surface, a shadow will appear at its
bottom.
If the shadow falls on the white inner circle at its bottom, it means that the solar panel is facing directly
towards sun and you can get optimal power generation; if not, it is suggested to adjust its angle until it
does.
02
DC8020-DC7909
Adapter
DC8020 Male
DC8020 Male
Solar Panel Connector
DC8020 Male