Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
If you put less than
half the maximum load of laundry into
your machine, the half-load function will
be automatically set, regardless of the
programme you selected. This means
that the selected programme will take less
time to complete and will use less water
and energy. When your machine detects
half load, the
symbol is displayed
automatically.
(*) Model Dependant
9. Start/Pause Button
Wash
Rinse
Washing
Rinsing
Spinning
End
To start the selected programme, press the
Start/Pause button.
If you switch your machine to standby
mode, the Start/Pause indicator on the
electronic display will blink.
5.8 Child Lock
The child lock function prevents the
machine being operated unintentionally or
by unsupervised children.
To activate the child lock, press and
hold additional functions 1 and 2 buttons
simultaneously for at least 3 seconds.
The Additional Function LEDs will be lit
on the control panel when the child lock is
activated.
If any button is pressed while the child lock
is active, the Additional Function LEDs on
the control panel will blink.
If the child lock is engaged and any
programme is running, when the
programme dial is turned to the CANCEL
Spin
End
Start-Pause
Wash
Rinse
Spin
End
position and another programme selected,
the previously selected programme
continues from where it was left.
To deactivate the child lock, press and
hold additional functions 1 and 2 buttons
simultaneously for at least 3 seconds. The
Additional Function LEDs will will blink on
the display.
5.9 Cancelling the Programme
To cancel a running programme at any
time:
1. Turn the programme dial to the "STOP"
position.
2. Your machine will stop the washing
operation and the programme will be
cancelled.
3. Turn the programme dial to any other
programme to drain the machine.
4. Your machine will perform the
necessary discharge operation and
cancel the programme.
You can now select and run a new
programme.
5.10 Programme End
Wash
Rinse
Spin
End
Your machine will stop by itself as soon as
the selected programme finishes.
• "END" will flash on the display panel
• You can open the machine's door and
remove the laundry.
• Leave the door of your machine open
to allow the inner part of your machine
to dry.
• Turn the programme dial to the "STOP"
position.
• Unplug your machine.
• Turn the water tap off.
EN - 17
Wash
Rinse
Spin
End
Publicidad
