cecotec 09940 Manual De Instrucciones página 50

ENGLISH
4. OPERATION
You can use this vacuum cleaner in two different manners:
Handheld vacuum cleaner, attaching the accessories directly to the main body.
1.
2. Upright vacuum cleaner, using the suction tube with the accessories assembled.
Using the handheld vacuum cleaner
Press the power button to turn the vacuum cleaner on or off.
Press the speed knob repeatedly to select the appliance operating speed: Eco and Turbo. The
appliance will turn on in Eco mode by default.
Accessories
This appliance includes different accessories that allow cleaning different types of surfaces,
objects, and dirt. Some of them are suitable for the upright vacuum cleaner, and others are
preferably used with the handheld one.
Mixed brush
To be used with the upright vacuum cleaner. The Mixed brush is suitable to all types of floor.
2-in-1 accessory
This accessory is preferably used with the handheld vacuum cleaner and allows cleaning
furniture without damaging it.
Accessory for corners
This accessory is preferably used with the handheld vacuum cleaner to reach less accessible
dirt in corners.
Installing the wall bracket
Fig. 5
- Place the wall bracket on the wall and mark the points where the holes are to be drilled
to fix the bracket. It is important that the vacuum head rests on the floor so that the wall
bracket does not support the full weight of the vacuum cleaner.
- Drill the 3 holes (previously marked) and insert the plugs and screws.
- Make sure that the charging base is securely fixed to the wall and place the vacuum cleaner
on the bracket, inserting the charging terminals of the vacuum cleaner into the charging
terminals of the bracket (plastic tab).
- Once the wall bracket is installed, connect the power adapter to the charging port: you
will then be able to charge the vacuum cleaner by simply sliding it up and down the wall
bracket.
50